Board Support

This is the authoritative AI-facing exact-board reference and lookup entry point for the repository's source-backed board inventory. It resolves a named target to one exact profile, extracts capabilities and risks, and hands the result to downstream skills. It does not replace board-selection, which owns choosing or replacing a board from project requirements.

Read First

1. Read the shared Arduino skill contract.
2. Read the board inventory and the AI reference schema.
3. Read the matched Markdown profile and its fact-to-source map from ../../references/boards/.
4. Load ../pin-assignment/SKILL.md only when the user also asks for a GPIO allocation or declarations.
5. Load ../embedded-project-loop/SKILL.md first when the request includes wiring, flashing, powering, measurement, recovery, or multi-session work.

For a repository checkout, use the deterministic resolver before interpreting the profile:

python3 ../../scripts/resolve_board_profile.py \
  --query "<board name>" --purpose lookup

Use --purpose pin or --purpose electrical for those advice paths and pass confirmed values with repeated --identity FIELD=VALUE options. A non-zero resolver status is a stop condition, not permission to guess.

The index is a compact retrieval surface. The Markdown profile is the detailed source-of-truth for facts, caveats, and gaps. Do not invent fields that are not in the profile or its cited primary sources.

Ownership And Routing

• Named-board lookup, capability questions, profile retrieval, exact pin-risk checks, source-confidence questions, and framework compatibility checks start here.
• Board choice, replacement, trade-off comparison, and lifecycle selection from requirements start at board-selection; it may call this skill for facts.
• Combined firmware/electronics/power/networking/deployment work starts at arduino-workflow-router; the router loads this skill when a named board must be resolved.
• Pin allocation and raw declaration formatting belong to pin-assignment.

Resolution Procedure

1. Capture the board name, exact revision, module suffix, MCU, framework/core, toolchain, host, and requested proof stage. Mark missing values as unknown.

2. Normalize the user's board name against id, name, and aliases in the index. Require exactly one match. A marketing family, clone, carrier, or module with a different suffix is not an exact match.

3. Read the matched identity_contract. If its profile_type is bounded-variant-family, confirm the requested variant and every field in required_for_pin_advice or required_for_electrical_advice before giving advice that depends on that boundary. Common facts may be reported only when the profile marks them as shared; never silently choose a variant.

4. If identity is sufficient, read its Markdown profile and return the compact identity, logic level, memory, buses, ADC/PWM/timer capabilities, reserved or risky pins, framework/toolchain boundary, source confidence, and open gaps.

5. Keep MCU electrical limits separate from board regulator, connector, total GPIO, radio peak, or external-load limits. Preserve unknown, gap, and verify statements instead of filling them with family assumptions.

6. For a framework request, record the exact board package/core, version or commit, FQBN/PlatformIO environment, library versions, and upload tool. A profile's framework list is compatibility scope, not proof that a build ran.

7. For a pin request, pass this handoff to pin-assignment:

   board_id: <index id>
   profile: <references/boards/*.md>
   resolution_status: <resolved | needs-disambiguation | unsupported | profile-gap>
   exact_identity: <board revision and module, or unknown>
   identity_contract: <profile_type, variant, and required fields>
   framework_core: <framework/core/version or unknown>
   logic_level: <value and source status>
   reserved_or_risky_pins: <input-only, strapping, flash/PSRAM, USB, debug, bus, LED>
   usable_capabilities: <ADC/PWM/UART/I2C/SPI/touch/PIO/etc.>
   unresolved: <gaps that block a safe assignment>
   

   Copy

   pin-assignment must re-check the exact physical pins before emitting any declaration. Keep logical IDs separate from physical GPIO numbers and preserve the raw ordered constexpr int convention.

Resolution Envelope

Start the response with this compact record so another skill can consume the lookup without parsing prose. Use needs-disambiguation when a bounded family is matched but a required variant, revision, module, or framework field is missing. Use profile-gap when the identity is sufficient but the requested fact is not source-backed in the profile.

resolution_status: resolved | needs-disambiguation | unsupported | profile-gap
board_id: <index id or null>
profile: <references/boards/*.md or null>
matched_alias: <normalized user term or null>
identity:
  profile_type: <exact-board | bounded-variant-family | null>
  variant: <confirmed value or unknown>
  revision: <confirmed value or unknown>
  module_suffix: <confirmed value or unknown>
required_disambiguators: []
framework_core: <name/version or unknown>
evidence:
  source_confidence: <index value or unknown>
  checked: <YYYY-MM-DD or unknown>
  physical_status: unverified

The envelope is a routing record, not a build, upload, hardware, system, or deployment claim. unsupported means no indexed profile matched; profile-gap means the profile matched but the requested fact is not source-backed.

Ambiguous And Unsupported Targets

• If multiple profiles match, stop and ask for the revision, module suffix, board photo, product identifier, or framework target needed to disambiguate.
• If no profile matches, say unsupported by the indexed board set, provide the minimum primary sources needed for a new profile, and do not map pins from a similar board. board-selection may compare it only after its identity and sources are established.
• For clones and carriers, identify the reference profile as a comparison only and label every unverified board-level assumption.

Output Contract

Return these sections, even for a short lookup:

1. Assumptions: exact identity, unknowns, and clone/revision boundary.
2. Required tools and versions: framework/core, board package, toolchain, host, and library versions needed for the requested path.
3. Implementation steps: ordered lookup, profile, and downstream handoff.
4. Tests and evidence: source/profile checks and proof stage; mark physical, build, upload, system, and deployment stages separately.
5. Known limitations: unsupported fields, source gaps, and revision scope.
6. Recovery and security notes: boot/USB/debug risks, rollback path, and secret-handling requirements when the target is connected.

Anti-Rationalization

Verification Boundary

Source lookup and schema validation are documentation evidence. They do not prove wiring, power, flashing, runtime behavior, system behavior, or field deployment. If the next step requires a physical action, use the shared physical-world gate and ask one concrete user question before continuing.

Use the shared Arduino skill contract for assumptions, tools, implementation steps, evidence, limitations, and recovery/security notes.