enclosure-designer
Use when users need a 3D-printable enclosure for an Arduino, ESP32, or RP2040 project and need help with measurements, cutouts, print settings, or environmental protection.
- Installs
- 175
- Last 24h
- —
- Trending rank
- —
- Security
- Not audited
Install
Works with every agent the skills CLI supports.
npx skills add https://github.com/wedsamuel1230/embedded-engineering-skills --skill enclosure-designer- 01
Install
Run the command in your project. The CLI asks which agents to install for.
- 02
Describe the task
Ask your agent for something this skill covers. It loads enclosure-designer automatically when relevant.
- 03
Review the result
The agent follows the SKILL.md steps, scripts and references bundled with the skill.
SKILL.md
The instructions your agent reads when the skill is triggered.
Enclosure Designer
Use this skill to design practical enclosures without loading a full mechanical guide up front.
Resources
assets/basic-template.scad- starting OpenSCAD templatescripts/generate_enclosure.py- enclosure generator scriptreferences/design-workflow.md- measurement, parameter, and generator workflowreferences/dimensions.md- common board and module dimensionsreferences/print-and-protection.md- wall thickness, print settings, ventilation, and waterproofing
When to Use
Use this skill when the user asks for:
- an enclosure, case, box, or housing
- mounting holes or cutout placement
- OpenSCAD-based enclosure generation
- board fit checks for Arduino, ESP32, or Pico-class boards
- print-material or weather-resistance guidance
Workflow
- Gather the minimum physical inputs:
- board dimensions
- tallest component
- connector locations
- mounting method
- environmental constraints
- Open
references/design-workflow.mdfor the parameterization flow. - Open
references/dimensions.mdif the user does not already have exact measurements. - Open
references/print-and-protection.mdfor material, wall, ventilation, or moisture guidance. - Use
assets/basic-template.scadorscripts/generate_enclosure.pywhen the user needs a concrete starting model.
Core Rules
- Treat user measurements as authoritative over reference dimensions.
- Add clearance deliberately for connectors, wiring, and print tolerance.
- Separate fit problems from printability problems.
- Do not promise waterproofing from geometry alone.
Verification
- The board and connectors fit with explicit clearance.
- Mounting points and cable exits are reachable.
- The selected material and wall thickness match the use environment.
- Print orientation and support strategy are named before finalizing the design.
Integration
- Pair with
battery-selectororpower-budget-calculatorif battery size drives the enclosure volume. - Pair with
readme-generatorwhen the enclosure should be documented for a project repo.
Shared Output Contract
Use the shared Arduino skill contract: state assumptions, required tools and versions, implementation steps, tests/evidence by proof stage, known limitations, and recovery/security notes.
FAQ
What does the enclosure-designer skill do?
Use when users need a 3D-printable enclosure for an Arduino, ESP32, or RP2040 project and need help with measurements, cutouts, print settings, or environmental protection.
How do I install enclosure-designer?
Run npx skills add https://github.com/wedsamuel1230/embedded-engineering-skills --skill enclosure-designer in your project. The skills CLI detects the agents you use and copies the skill into the right folder. For Claude Code you can also place the skill folder at ~/.claude/skills/enclosure-designer/ (personal) or .claude/skills/enclosure-designer/ (project).
Which AI agents can use enclosure-designer?
Any agent that supports the open Agent Skills format (a folder with a SKILL.md file), including Claude Code, Codex, Cursor, GitHub Copilot, Gemini CLI, Windsurf, Cline, OpenCode and more.
Is enclosure-designer safe to install?
No partner security audit is available yet. Skills can run commands and scripts, so read the SKILL.md and any bundled files before installing.
Who maintains enclosure-designer?
It is published by wedsamuel1230 in wedsamuel1230/embedded-engineering-skills. It has 175 recorded installs.
More from wedsamuel1230/embedded-engineering-skills
arduino-project-builder
wedsamuel1230/embedded-engineering-skills
Build complete Arduino and embedded projects across Arduino IDE, Arduino CLI, PlatformIO, and vendor-specific toolchains. Use when users request an application combining firmware, sensors, actuators, networking, power, or deployment rather than a code snippet. The bundled scaffold targets UNO, ESP32, and Raspberry Pi Pico; use the board profile and document limitations for other targets.
arduino-code-generator
wedsamuel1230/embedded-engineering-skills
Generate Arduino and embedded C++ snippets for sensors, actuators, buses, state machines, timing, data logging, and hardware abstraction. Use when a user requests implementation code and provide the exact board, framework, toolchain, pins, voltage, memory, and library versions first. Bundled templates target UNO, ESP32, and RP2040; document unsupported board or vendor-framework behavior instead of guessing.
circuit-debugger
wedsamuel1230/embedded-engineering-skills
Open the skill to read its SKILL.md instructions.
arduino-serial-monitor
wedsamuel1230/embedded-engineering-skills
Open the skill to read its SKILL.md instructions.
error-message-explainer
wedsamuel1230/embedded-engineering-skills
Open the skill to read its SKILL.md instructions.
power-budget-calculator
wedsamuel1230/embedded-engineering-skills
Open the skill to read its SKILL.md instructions.
Popular frontend & design skills
setup-matt-pocock-skills
mattpocock/skills
Configure this repo for the engineering skills: set up its issue tracker, triage label vocabulary, and domain doc layout. Run once before first use of the other engineering skills.
frontend-design
anthropics/skills
Guidance for distinctive, intentional visual design when building new UI or reshaping an existing one. Helps with aesthetic direction, typography, and making choices that don't read as templated defaults.
hyperframes-animation
heygen-com/hyperframes
All animation knowledge for HyperFrames — atomic motion rules, multi-phase scene blueprints, scene transitions, broader motion-design techniques, AND the seven runtime adapters (GSAP default, plus Lottie, Three.js, Anime.js, CSS keyframes, Web Animations API, TypeGPU). Use for any motion or animation task: pick 2-4 rules and compose, or load a blueprint, or look up runtime-specific API (e.g. GSAP eases / Lottie player / Three.js mixer). Also covers auditing an existing composition's choreography (animation map) and 24 named text-animation effects. HyperFrames-native: single paused timeline, seek-safe, deterministic.
prototype
mattpocock/skills
Build a throwaway prototype to answer a design question. Use when the user wants to sanity-check whether a state model or logic feels right, or explore what a UI should look like.
hyperframes-core
heygen-com/hyperframes
The HyperFrames composition contract — build one renderable project. Use for composition structure, the data- timing attributes, class="clip", tracks, sub-compositions, variables, framework-owned media playback, deterministic-render rules, and validation. Read before writing composition HTML.
vercel-react-best-practices
vercel-labs/agent-skills
React and Next.js performance optimization guidelines from Vercel Engineering. This skill should be used when writing, reviewing, or refactoring React/Next.js code to ensure optimal performance patterns. Triggers on tasks involving React components, Next.js pages, data fetching, bundle optimization, or performance improvements.