stm32-hal-development
Develop STM32 firmware on CubeMX-generated HAL projects, including peripheral configuration, BSP driver structure, interrupt-safe code, and hardware-aware troubleshooting. Use when Codex needs STM32 HAL implementation guidance rather than generic C advice.
- Installs
- 274
- Last 24h
- —
- Trending rank
- —
- Security
- Not audited
Install
Works with every agent the skills CLI supports.
npx skills add https://github.com/leokemp223/embed-ai-tool --skill stm32-hal-development- 01
Install
Run the command in your project. The CLI asks which agents to install for.
- 02
Describe the task
Ask your agent for something this skill covers. It loads stm32-hal-development automatically when relevant.
- 03
Review the result
The agent follows the SKILL.md steps, scripts and references bundled with the skill.
SKILL.md
The instructions your agent reads when the skill is triggered.
STM32 HAL Development
Treat this skill as the working playbook for CubeMX-based STM32 projects.
Workflow
- Read references/core-guidelines.md first.
- Keep all custom code inside
USER CODEregions unless the project has an explicit non-CubeMX extension point. - Configure peripherals in CubeMX, regenerate code, then add application or BSP logic.
- Read additional references only as needed:
- references/peripheral-driver-guide.md for sensor and bus drivers
- references/hal-quick-reference.md for API lookups
- references/troubleshooting-guide.md for failure analysis
- references/usage-examples.md for implementation patterns
- Reuse assets/bsp-template.c and assets/bsp-template.h when starting a new BSP module.
Notes
- Prioritize hardware constraints, interrupt safety, and regeneration safety over local code convenience.
- Do not modify CubeMX-generated initialization files directly when the same change belongs in the
.iocconfiguration.
FAQ
What does the stm32-hal-development skill do?
Develop STM32 firmware on CubeMX-generated HAL projects, including peripheral configuration, BSP driver structure, interrupt-safe code, and hardware-aware troubleshooting. Use when Codex needs STM32 HAL implementation guidance rather than generic C advice.
How do I install stm32-hal-development?
Run npx skills add https://github.com/leokemp223/embed-ai-tool --skill stm32-hal-development in your project. The skills CLI detects the agents you use and copies the skill into the right folder. For Claude Code you can also place the skill folder at ~/.claude/skills/stm32-hal-development/ (personal) or .claude/skills/stm32-hal-development/ (project).
Which AI agents can use stm32-hal-development?
Any agent that supports the open Agent Skills format (a folder with a SKILL.md file), including Claude Code, Codex, Cursor, GitHub Copilot, Gemini CLI, Windsurf, Cline, OpenCode and more.
Is stm32-hal-development safe to install?
No partner security audit is available yet. Skills can run commands and scripts, so read the SKILL.md and any bundled files before installing.
Who maintains stm32-hal-development?
It is published by leokemp223 in leokemp223/embed-ai-tool. It has 274 recorded installs.
More from leokemp223/embed-ai-tool
build-keil
leokemp223/embed-ai-tool
当需要通过 Keil MDK 命令行编译嵌入式工程，调用自带脚本解析工程文件、执行构建并定位固件产物时使用。
build-platformio
leokemp223/embed-ai-tool
当需要通过 PlatformIO 命令行编译嵌入式工程，调用自带脚本解析环境配置、执行构建并定位固件产物时使用。
workflow
leokemp223/embed-ai-tool
当需要串联多个 skill 完成编译+烧录+监控或编译+烧录+调试等流水线任务时使用。
flash-keil
leokemp223/embed-ai-tool
当需要通过 Keil MDK 内置调试器烧录固件到目标板时使用，利用工程中已配置的调试器和 Flash 算法执行下载。
Popular other skills
hyperframes-cli
heygen-com/hyperframes
The HyperFrames CLI by job - scaffold, check, look at frames, edit the timeline, preview, render locally or in the cloud, publish, project history - plus reading its JSON and recovering from build or render failures.
triage
mattpocock/skills
Move issues and external PRs through a state machine of triage roles, categorise, verify, grill if needed, and write agent-ready briefs.
ask-matt
mattpocock/skills
Ask which skill or flow fits your situation. A router over the skills in this repo.
to-questionnaire
mattpocock/skills
Turn a decision you can't fully answer into a questionnaire for someone else to fill in.
loop-me
mattpocock/skills
Grill me about specs for the workflows I want to build, within this workspace.