simpo-training

Q: How do I install simpo-training?

Run npx skills add https://github.com/orchestra-research/ai-research-skills --skill simpo-training in your project. The skills CLI detects the agents you use and copies the skill into the right folder. For Claude Code you can also place the skill folder at ~/.claude/skills/simpo-training/ (personal) or .claude/skills/simpo-training/ (project).

by orchestra-researchProductivity & Automation

Simple Preference Optimization for LLM alignment. Reference-free alternative to DPO with better performance (+6.4 points on AlpacaEval 2.0). No reference model needed, more efficient than DPO. Use for preference alignment when want simpler, faster training than DPO/PPO.

Installs: 955
Last 24h: —
Trending rank: —
Security: Not audited

Install

Works with every agent the skills CLI supports.

npx skills add https://github.com/orchestra-research/ai-research-skills --skill simpo-training

01
Install
Run the command in your project. The CLI asks which agents to install for.
02
Describe the task
Ask your agent for something this skill covers. It loads simpo-training automatically when relevant.
03
Review the result
The agent follows the SKILL.md steps, scripts and references bundled with the skill.

SKILL.md

The instructions your agent reads when the skill is triggered.

SimPO - Simple Preference Optimization

Quick start

SimPO is a reference-free preference optimization method that outperforms DPO without needing a reference model.

Installation:

# Create environment
conda create -n simpo python=3.10 && conda activate simpo

# Install PyTorch 2.2.2
# Visit: https://pytorch.org/get-started/locally/

# Install alignment-handbook
git clone https://github.com/huggingface/alignment-handbook.git
cd alignment-handbook
python -m pip install .

# Install Flash Attention 2
python -m pip install flash-attn --no-build-isolation

Training (Mistral 7B):

ACCELERATE_LOG_LEVEL=info accelerate launch \
  --config_file accelerate_configs/deepspeed_zero3.yaml \
  scripts/run_simpo.py \
  training_configs/mistral-7b-base-simpo.yaml

Common workflows

Workflow 1: Train from base model (Mistral 7B)

Config (mistral-7b-base-simpo.yaml):

# Model
model_name_or_path: mistralai/Mistral-7B-v0.1
torch_dtype: bfloat16

# Dataset
dataset_mixer:
  HuggingFaceH4/ultrafeedback_binarized: 1.0
dataset_splits:
  - train_prefs
  - test_prefs

# SimPO hyperparameters
beta: 2.0                  # Reward scaling (2.0-10.0)
gamma_beta_ratio: 0.5       # Target margin (0-1)
loss_type: sigmoid          # sigmoid or hinge
sft_weight: 0.0             # Optional SFT regularization

# Training
learning_rate: 5e-7         # Critical: 3e-7 to 1e-6
num_train_epochs: 1
per_device_train_batch_size: 1
gradient_accumulation_steps: 8

# Output
output_dir: ./outputs/mistral-7b-simpo

Launch training:

accelerate launch --config_file accelerate_configs/deepspeed_zero3.yaml \
  scripts/run_simpo.py training_configs/mistral-7b-base-simpo.yaml

Workflow 2: Fine-tune instruct model (Llama 3 8B)

Config (llama3-8b-instruct-simpo.yaml):

model_name_or_path: meta-llama/Meta-Llama-3-8B-Instruct

dataset_mixer:
  argilla/ultrafeedback-binarized-preferences-cleaned: 1.0

beta: 2.5
gamma_beta_ratio: 0.5
learning_rate: 5e-7
sft_weight: 0.1             # Add SFT loss to preserve capabilities

num_train_epochs: 1
per_device_train_batch_size: 2
gradient_accumulation_steps: 4
output_dir: ./outputs/llama3-8b-simpo

Launch:

accelerate launch --config_file accelerate_configs/deepspeed_zero3.yaml \
  scripts/run_simpo.py training_configs/llama3-8b-instruct-simpo.yaml

Workflow 3: Reasoning-intensive tasks (lower LR)

For math/code tasks:

model_name_or_path: deepseek-ai/deepseek-math-7b-base

dataset_mixer:
  argilla/distilabel-math-preference-dpo: 1.0

beta: 5.0                   # Higher for stronger signal
gamma_beta_ratio: 0.7       # Larger margin
learning_rate: 3e-7         # Lower LR for reasoning
sft_weight: 0.0

num_train_epochs: 1
per_device_train_batch_size: 1
gradient_accumulation_steps: 16

When to use vs alternatives

Use SimPO when:

Want simpler training than DPO (no reference model)
Have preference data (chosen/rejected pairs)
Need better performance than DPO
Limited compute resources
Single-node training sufficient

Algorithm selection:

SimPO: Simplest, best performance, no reference model
DPO: Need reference model baseline, more conservative
PPO: Maximum control, need reward model, complex setup
GRPO: Memory-efficient RL, no critic

Use alternatives instead:

OpenRLHF: Multi-node distributed training, PPO/GRPO
TRL: Need multiple methods in one framework
DPO: Established baseline comparison

Common issues

Issue: Loss divergence

Reduce learning rate:

learning_rate: 3e-7  # Reduce from 5e-7

Reduce beta:

beta: 1.0  # Reduce from 2.0

Issue: Model forgets capabilities

Add SFT regularization:

sft_weight: 0.1  # Add SFT loss component

Issue: Poor preference separation

Increase beta and margin:

beta: 5.0            # Increase from 2.0
gamma_beta_ratio: 0.8  # Increase from 0.5

Issue: OOM during training

Reduce batch size:

per_device_train_batch_size: 1
gradient_accumulation_steps: 16  # Maintain effective batch

Enable gradient checkpointing:

gradient_checkpointing: true

Advanced topics

Loss functions: See references/loss-functions.md for sigmoid vs hinge loss, mathematical formulations, and when to use each.

Hyperparameter tuning: See references/hyperparameters.md for beta, gamma, learning rate selection guide, and model-size-specific recommendations.

Dataset preparation: See references/datasets.md for preference data formats, quality filtering, and custom dataset creation.

Hardware requirements

GPU: NVIDIA A100/H100 recommended
VRAM:
- 7B model: 1× A100 40GB (DeepSpeed ZeRO-3)
- 8B model: 2× A100 40GB
- 70B model: 8× A100 80GB
Single-node: DeepSpeed ZeRO-3 sufficient
Mixed precision: BF16 recommended

Memory optimization:

DeepSpeed ZeRO-3 (default config)
Gradient checkpointing
Flash Attention 2

Resources

Paper: https://arxiv.org/abs/2405.14734 (NeurIPS 2024)
GitHub: https://github.com/princeton-nlp/SimPO
Models: https://huggingface.co/princeton-nlp
Alignment Handbook: https://github.com/huggingface/alignment-handbook

FAQ

What does the simpo-training skill do?

How do I install simpo-training?

Run npx skills add https://github.com/orchestra-research/ai-research-skills --skill simpo-training in your project. The skills CLI detects the agents you use and copies the skill into the right folder. For Claude Code you can also place the skill folder at ~/.claude/skills/simpo-training/ (personal) or .claude/skills/simpo-training/ (project).

Which AI agents can use simpo-training?

Any agent that supports the open Agent Skills format (a folder with a SKILL.md file), including Claude Code, Codex, Cursor, GitHub Copilot, Gemini CLI, Windsurf, Cline, OpenCode and more.

Is simpo-training safe to install?

No partner security audit is available yet. Skills can run commands and scripts, so read the SKILL.md and any bundled files before installing.

Who maintains simpo-training?

It is published by orchestra-research in orchestra-research/ai-research-skills. It has 955 recorded installs.