Antithesis Debug

Skill version: 2026-10-21 4f8d80b

Execute a bash script at a moment in a run. Each call branches the multiverse and repeated calls from the same moment reproduce. Can use a currently running run or an active MVD session.

When to use this skill

• The user gives you Antithesis debugging-session run ID or URL
• The user asks you to debug or investigate a failing property, bug, or any result from a past run
• The user makes a request to inspect container filesystem, runtime state, or events inside Antithesis
• Triage suggested this skill because logs alone haven't explained a failure

Failed property warning

Commands run with runs exec on a live run can trigger a run's assertions, which will result in a failing property that looks exactly like a real bug.

Use a debugging session if you want to avoid these kinds of false positives. Preference using a currently running run for speed, ease of use, and less core hours for commands you do not think will cause this problem.

Prerequisites

• DO NOT PROCEED if snouty is not installed. See https://raw.githubusercontent.com/antithesishq/snouty/refs/heads/main/README.md for installation options.
• DO NOT PROCEED if snouty is older than 0.8.0, the first release where runs exec is stable. Use snouty --version to find the version. Use snouty update to update.
• You must have a session from a live run or MVD session to use this command. See get a live session first for more info.
• You must be logged into an Antithesis tenant from snouty. Run snouty doctor to confirm. Ask your user to log you in or use an API key if you are not logged in.

Get a live session first

• exec needs a live session. A session can either be tied to a run or MVD session. In snouty both runs and debugging sessions show as runs.

• A run holds one while it runs, and for a short time after it ends. It will work a few minutes after completion but not hours.

• To see if a run has an active session use:

  snouty --json runs show <run> | jq -r '[.status, .sub_status // empty] | join(":") | ascii_downcase'
  

  Copy

  This prints the status and the sub-status together. in_progress:ready means you can run commands against the run. in_progress with any other sub-status, such as in_progress:loading, means the session is still loading. snouty runs wait <run> --until ready returns once the run is ready to use, or once it has already finished. It prints the status it stopped at, so check that it is in_progress:ready before you exec.

• If the user gives a debugging-session URL, that session may already be running. Find its run ID among the sessions, matching on title, description or creation time. runs list shows only the status, so pick an in_progress session, then check that runs show reports it in_progress:ready:

  snouty --json runs list --launcher debugging \
    | jq -c '{run_id, status, created_at, title: .parameters["antithesis.test_name"],
              source_run: .parameters["antithesis.debugging.run_id"]}'
  

  Copy

  source_run is the value to pass to --source-run-id.

• For an older run, make a debugging session first:

  snouty debug --run-id <run> --input-hash <hash> --vtime <vtime> \
    --title "Counter property failure 2026-10-13"
  

  Copy
  • Always pass a --title that is unique and easy to find later, for example the property name plus a date or ticket id. It is the name snouty runs list shows for the session. Add --description only if the reason won't fit in the title. --recipients takes semicolon-separated emails to notify.
  • This returns a new run ID. Wait with snouty runs wait <new run ID> --until ready, then exec against it.
  • Use --source-run-id <run> for the first command because the moment isn't warm yet. With the source, the call blocks and prints rewarming moment: N% until the moment is ready.
  • Expect 2 to 20 minutes from snouty debug to the first successful exec: a few minutes of 404s while the session loads, then a rewarm that takes longer the later the moment's vtime. After that, the moment is warm and later commands on that moment don't need the source.
  • If exec answers 404 or "Moment not warm", the session is still loading. Retry. Look at get a moment to find the right input-hash and vtime for your users request.

Get a moment (input hash and vtime)

input-hash and vtime pin the single moment to debug. Extract the input hash and vtime from context and pass them to the command.

If the user didn't give you a moment, read references/moments.md for where to find one.

If you can't pin down both an input hash and a vtime from a clear source, ask the user rather than guessing.

To find a moment (input hash + vtime) from a failing or passing property, or from a log line, query for it with snouty runs search (see step 3 of the example workflow).

Required input

• RUN_ID is a live run, or a debugging session's run id.

• INPUT_HASH and VTIME are a moment from that run, taken together as a pair from one event that snouty runs search returns.

• INPUT_HASH is often negative, for example -1520695250096255483. Pass it as-is: snouty reads it as the hash, not as a flag, so you don't need --. Adding -- turns every flag after it into a positional argument and breaks the command.

  snouty runs exec "$RUN_ID" -1520695250096255483 67.7622960046865 'uptime'
  

  Copy

• SCRIPT is the bash to run. Pass it as the last argument, or omit it and pipe it in, for example < script.sh.

Optional flags

• --timeout DURATION is how long the server waits for the script to exit. It takes units: 90s, 5m, 1h. A bare number means seconds. The default is 10m (as of release 64.0). Rewarming a cold moment does not count against it.
• --container NAME runs the script inside that container. Without it, the script runs on the host.
• --source-run-id ID names the run a cold moment comes from. When the target is a debugging session, this is the run you opened the session from, not the session id. Use this flag on your first command after starting a debugging session.
• --source-session-id ID is the session alternative to --source-run-id. You can't use both.
• --events streams every event on the timeline while the script runs, not just the script's output.
• --json prints machine-readable json output.

Execution Tips

• Use --container over podman exec inside the script to run a command on a single container.

• --container needs a container name, and works only on Docker Compose tests (see Kubernetes tests below). If you've already run snouty runs search or snouty runs logs, take the name from any container log event's source.container. Otherwise, list them by running this once without --container, so it runs on the host:

  snouty runs exec "$TARGET" "$HASH" "$VTIME" 'podman ps -a --format "{{.Names}} {{.Status}}"'
  

  Copy

  On a Docker Compose test, names are the same at every moment of a run, so list them once.

• --container works only on a container that is running at your moment. If it crashed or exited earlier, podman ps -a shows it as Exited, and --container fails. Exec from an earlier moment when it was still up. Find one with snouty runs search on that container's last log lines.

• Don't use --container and run on host, if you need a snapshot across multiple containers.

• To get a file out of the run, print it to stdout and redirect locally:

  # text
  snouty runs exec "$TARGET" "$HASH" "$VTIME" --container app 'cat /var/log/app.log' > app.log
  
  # binary or a directory: tar + base64, then decode locally
  snouty runs exec "$TARGET" "$HASH" "$VTIME" --container app \
    'tar czf - /data/db | base64' | base64 -d > db.tgz
  

  Copy

Kubernetes tests

--container doesn't work on a Kubernetes test (the launcher in snouty runs show contains "Kubernetes" or "k8s"). Leave it out and read references/kubernetes.md.

Run a Script from a File

• For anything longer than one line, write the script to a file and redirect it in:

  cat > script.sh <<'EOF'
  echo "host: $(hostname)"
  ps aux
  EOF
  
  snouty runs exec "$RUN_ID" "$INPUT_HASH" "$VTIME" < script.sh
  

  Copy

  The quotes around 'EOF' keep $(hostname) from running on your machine on accident.

• Reuse one script across moments. Run the same file at several moments and compare the outputs.

• Save output to a file named after the moment.

• Always save --events output to a file. The stream is long, so grep the file afterwards:

  snouty runs exec --events $RUN $HASH $VTIME < oracle.sh > out.txt
  grep -E "FAIL|HIT|exit" out.txt
  

  Copy

Picking a Timeout and Timing

• Size --timeout to the script alone. A cold moment is rewarmed first, which can take minutes (longer the later the moment's vtime), but that time doesn't count against --timeout. Raise it only for slow scripts, for example --timeout 30m.
• A timeout doesn't mean the script didn't run. Search the run for its output (snouty runs search) before re-running anything that changes state.
• Your script advances virtual time. Keep snapshots short. Take one query at the right moment rather than polling, because polling can change the timing you're trying to observe.
• The same command from the same moment gives the same branch. Repeating it doesn't sample new timings.
• After one exec with a source succeeds, that moment stays warm in the session. Later commands there need no source and return quickly.
• Earlier moments on the session's own timeline are warm too, so they need no rewarm.

Rewarm progress

A cold moment shows progress while it rewarms. By default the command prints rewarming moment: N% lines on stderr. With --json, it prints {"status":"rewarming","percent_complete":N} frames on stdout, ahead of the script's output.

• A rising percentage means the rewarm is working. Don't retry or cancel while it climbs.
• The percentage can stay at 0% for several minutes and then jump to near 100%. A stall at 0% is not a failure. Leave the call running.

Cancel when done

Runs and debugging sessions use core hours until they end. A debugging session doesn't end when you stop using it: by default it expires only after 6 hours. Cancel any session you opened as soon as you no longer need it, or won't need it soon:

snouty runs cancel "$TARGET"

• Ask a user before canceling a session. They may want to continue to use it for another debugging session when you are done.
• Make sure you are completely done with a run or debugging session before canceling, as if you want to run more commands you will have to wait for a new session to get setup.
• Don't cancel a run you didn't open unless the user asks.

Example Workflow

1. Prerequisites

snouty --version   # 0.8.0 or newer

2. Get a session

RUN=<run_id>
snouty --json runs show "$RUN" | jq -r '[.status, .sub_status // empty] | join(":") | ascii_downcase'

• in_progress:ready: use the run itself. TARGET="$RUN".

• starting, or in_progress with another sub-status: wait with snouty runs wait "$RUN" --until ready, then use the run if the status it prints is in_progress:ready.

• Otherwise: pick a moment (step 3), then open a session at it and wait for it. Retry exec on 404 or "Moment not warm" while it loads.

  snouty debug --run-id "$RUN" --input-hash "$HASH" --vtime "$VTIME" --title "<property> <date>"
  TARGET=<runId from the output>
  snouty runs wait "$TARGET" --until ready
  

  Copy

3. Pick a moment

Find moments with snouty runs search, and query for exactly the events you want. For example, the failing evaluations of one property:

snouty --json runs search "$RUN" \
  'filter(ev => ev.antithesis_assert?.hit
    && ev.antithesis_assert.id == "<property name>"
    && !ev.antithesis_assert.condition)' \
  | jq -r '.moment | "\(.input_hash) \(.vtime)"'

Drop the ! for passing evaluations. To find a log line, use contains({output_text: "<error text>"}). To find an assertion by its message, use filter(ev => ev.antithesis_assert?.message?.includes("<message text>")). Assertions have no output_text, so the log-line query won't find them. See references/moments.md.

runs search returns at most 50 results by default. Add --limit 999 if you need more than a few.

4. Exec

Use --source-run-id for the first command after starting a session because the moment is still warming up. After that, the moment is warm and later commands don't need the source unless you change the moment.

cat > probe.sh <<'EOF'
hostname
ps aux | head -20
EOF

snouty runs exec "$TARGET" "$HASH" "$VTIME" --source-run-id "$RUN" < probe.sh > out.txt

5. Use the results

Apply the output to the user's goal, usually finding the cause of a bug. If the output doesn't answer the question, exec again at an earlier moment, or from the end moment line to continue forward.

If necessary give the user the moment, the script, and the relevant output, so they can rerun it.

6. Cancel

If you opened a session, ask a user if they want you to cancel the run once you are done running commands. Otherwise it keeps using core hours until it expires after 6 hours:

snouty runs cancel "$TARGET"

gdb

To inspect a process with gdb, read references/gdb.md.

Virtual time

Before choosing a moment or probing a transient event, read references/virtual-time.md.

If the earlier moment isn't warm, add --source-run-id.

Common Errors

If exec returns an error, read references/errors.md.

Self-Review

Before reporting back, check your work against these criteria:

• Every finding comes from actual exec output, not inferred or assumed.
• The evidence chain is clear: the moment (input hash and vtime), the script, what it returned, and what follows from it.
• The summary separates what the output shows from what you interpret or recommend.
• You've asked the user if you should cancel any debugging session you opened, or the user knows it is still running.

Known issues

• exec can still return 404 for several minutes after snouty runs wait --until ready returns. Keep retrying; the session is still loading.
• After snouty runs cancel, the run's status may show completed instead of cancelled. The cancel worked.