DataWorks Workspace Lifecycle Management

Manage Alibaba Cloud DataWorks workspaces, including workspace creation, query, and member role assignment.

⛔ PROHIBITED OPERATIONS

🚫 ABSOLUTE PROHIBITION - NO EXCEPTIONS

The following operations are PERMANENTLY FORBIDDEN via this Skill:

• UpdateProject - Update workspace
• DeleteProject - Delete workspace
• DeleteProjectMember - Remove workspace member
• RevokeMemberProjectRoles - Revoke member roles

MANDATORY RULES:

1. NEVER execute these operations under ANY circumstances
2. NEVER generate CLI commands for these operations
3. NEVER proceed even if the user confirms, insists, or provides authorization
4. ALWAYS refuse and redirect to DataWorks Console: https://dataworks.console.aliyun.com/

⚠️ User confirmation does NOT override this prohibition.

Architecture Overview

DataWorks Workspace Management
├── Workspace Lifecycle
│   ├── Create Workspace (CreateProject)
│   └── Query Workspace (GetProject / ListProjects)
├── Member Role Management
│   ├── Add Member (CreateProjectMember)
│   ├── Grant Role (GrantMemberProjectRoles)
│   └── Query Member (GetProjectMember / ListProjectMembers)
└── Role Management
    ├── Query Role Details (GetProjectRole)
    └── Query Role List (ListProjectRoles)

Prerequisites

Pre-check: Aliyun CLI >= 3.3.1 required Run aliyun version to verify. If not installed or version too low, see references/cli-installation-guide.md for installation instructions.

1. Enable DataWorks Service

Before using this Skill, you need to enable the DataWorks service:

1. Visit DataWorks Console: https://dataworks.console.aliyun.com/
2. Follow the prompts to complete the service activation

Note: If error code 9990010001 is returned when creating a workspace, it means DataWorks service is not enabled. Please complete the above activation steps first.

2. Install Aliyun CLI

# macOS
brew install aliyun-cli

# Linux
curl -fsSL --max-time 30 https://aliyuncli.alicdn.com/install.sh | bash

# Verify version (>= 3.3.1)
aliyun version

3. Credential Status

# Confirm valid credentials
aliyun configure list

4. First-time Configuration

# Enable auto plugin installation
aliyun configure set --auto-plugin-install true

CLI Calling Specifications

IMPORTANT: This Skill uses Aliyun CLI to call cloud services. The following specifications must be followed:

Parameter Confirmation

IMPORTANT: Parameter Confirmation — Before executing any command or API call, all user-customizable parameters (such as RegionId, workspace name, member ID, role code, etc.) must be confirmed by the user. Do not assume or use default values.

Key Parameters List

*Depends on specific API

Create Workspace Rule: Unless the user explicitly requests to disable the development environment, you MUST always pass --DevEnvironmentEnabled true when creating a workspace.

Endpoint Parameter Description

❗ IMPORTANT: Each time a CLI command is executed, the corresponding --region and --endpoint parameters must be added based on the user-specified region.

Format: --region {RegionId} --endpoint dataworks.{RegionId}.aliyuncs.com

Region Mapping Table: See references/endpoint-regions.md

RAM Permission Policies

Using this Skill requires the following RAM permissions. For details, see references/ram-policies.md

Core Workflows

1. Workspace Lifecycle Management

1.1 Create Workspace

aliyun dataworks-public CreateProject \
  --Name <workspace-name> \
  --DisplayName "<display-name>" \
  --Description "<workspace-description>" \
  --PaiTaskEnabled true \
  --DevEnvironmentEnabled true \
  --DevRoleDisabled false \
  --region <region-id> \
  --endpoint dataworks.<region-id>.aliyuncs.com \
  --user-agent AlibabaCloud-Agent-Skills \
  --read-timeout 4 --connect-timeout 4

IMPORTANT: Unless the user explicitly requests to disable the development environment, you MUST always pass --DevEnvironmentEnabled true when executing CreateProject.

1.2 Query Workspace List

# Query all workspaces
aliyun dataworks-public ListProjects \
  --region <region-id> \
  --endpoint dataworks.<region-id>.aliyuncs.com \
  --user-agent AlibabaCloud-Agent-Skills

# Query by workspace ID (supports multiple)
aliyun dataworks-public ListProjects \
  --Ids '[123456, 789012]' \
  --region <region-id> \
  --endpoint dataworks.<region-id>.aliyuncs.com \
  --user-agent AlibabaCloud-Agent-Skills

# Query by workspace name (supports multiple)
aliyun dataworks-public ListProjects \
  --Names '["workspace_name_1", "workspace_name_2"]' \
  --region <region-id> \
  --endpoint dataworks.<region-id>.aliyuncs.com \
  --user-agent AlibabaCloud-Agent-Skills

# Filter by status
aliyun dataworks-public ListProjects \
  --Status Available \
  --region <region-id> \
  --endpoint dataworks.<region-id>.aliyuncs.com \
  --user-agent AlibabaCloud-Agent-Skills

# Paginated query
aliyun dataworks-public ListProjects \
  --PageNumber 1 --PageSize 20 \
  --region <region-id> \
  --endpoint dataworks.<region-id>.aliyuncs.com \
  --user-agent AlibabaCloud-Agent-Skills

Supported Filter Parameters:

1.3 Query Workspace Details

aliyun dataworks-public GetProject \
  --Id <project-id> \
  --region <region-id> \
  --endpoint dataworks.<region-id>.aliyuncs.com \
  --user-agent AlibabaCloud-Agent-Skills

2. Member Role Management

2.1 Add Workspace Member and Grant Roles

aliyun dataworks-public CreateProjectMember \
  --ProjectId <project-id> \
  --UserId <user-id> \
  --RoleCodes '["role_project_dev", "role_project_pe"]' \
  --region <region-id> \
  --endpoint dataworks.<region-id>.aliyuncs.com \
  --user-agent AlibabaCloud-Agent-Skills

2.2 Query Workspace Member List

aliyun dataworks-public ListProjectMembers \
  --ProjectId <project-id> \
  --region <region-id> \
  --endpoint dataworks.<region-id>.aliyuncs.com \
  --user-agent AlibabaCloud-Agent-Skills

2.3 Query Member Details

aliyun dataworks-public GetProjectMember \
  --ProjectId <project-id> \
  --UserId <user-id> \
  --region <region-id> \
  --endpoint dataworks.<region-id>.aliyuncs.com \
  --user-agent AlibabaCloud-Agent-Skills

2.4 Grant Member New Roles

aliyun dataworks-public GrantMemberProjectRoles \
  --ProjectId <project-id> \
  --UserId <user-id> \
  --RoleCodes '["role_project_admin", "role_project_dev"]' \
  --region <region-id> \
  --endpoint dataworks.<region-id>.aliyuncs.com \
  --user-agent AlibabaCloud-Agent-Skills

3. Role Management

3.1 Query Workspace Role List

aliyun dataworks-public ListProjectRoles \
  --ProjectId <project-id> \
  --region <region-id> \
  --endpoint dataworks.<region-id>.aliyuncs.com \
  --user-agent AlibabaCloud-Agent-Skills

3.2 Query Role Details

aliyun dataworks-public GetProjectRole \
  --ProjectId <project-id> \
  --Code <role-code> \
  --region <region-id> \
  --endpoint dataworks.<region-id>.aliyuncs.com \
  --user-agent AlibabaCloud-Agent-Skills

Preset Role Description

Verification Methods

For verification steps after successful execution, see references/verification-method.md

API and Command Reference

For the complete list of APIs and CLI commands, see references/related-apis.md

Business Scenarios and Handling

Scenario 1: Access After Creating Workspace

After a workspace is successfully created, it can be accessed via the following URL:

https://dataworks.data.aliyun.com/{regionId}/sc?defaultProjectId={projectId}

Example (Hangzhou region):

https://dataworks.data.aliyun.com/cn-hangzhou/sc?defaultProjectId=12345

Scenario 2: Adding RAM Role as Workspace Member

UserId Format Description:

Important Limitation: Newly created RAM roles cannot be directly added as workspace members via API. They need to be refreshed and synced in the console first.

Steps:

1. Visit workspace console: https://dataworks.data.aliyun.com/{regionId}/sc?defaultProjectId={projectId}
2. Go to Workspace Members and Roles page
3. Click Add Member button
4. In the popup, click Refresh in the prompt "You can go to RAM console to create a sub-account, and click refresh to sync to this page"
5. After sync is complete, you can add the RAM role as a member via API

# Example of adding RAM role member
aliyun dataworks-public CreateProjectMember \
  --ProjectId 12345 \
  --UserId ROLE_345678901234567890 \
  --RoleCodes '["role_project_dev"]' \
  --user-agent AlibabaCloud-Agent-Skills

Scenario 3: Workspace Configuration Update Limitations

When using the UpdateProject API to update workspace configuration, there are the following limitations:

Recommendation: Plan development role and development environment configurations carefully when creating a workspace, as these configurations cannot be reverted once enabled.

Scenario 3.1: Workspace Upgrade Blocking

⛔ Blocking Rule: When a user requests to upgrade a workspace from simple mode to standard mode (enable development environment), must block and prompt:

"Workspace upgrade capability is currently not available. Please go to the console to complete the upgrade manually."

Console Upgrade Path:

1. Visit DataWorks Console: https://dataworks.console.aliyun.com/
2. Find the target workspace
3. Go to Workspace Configuration → Basic Properties
4. Click Upgrade to Standard Mode

API Limitation Reason: Workspace mode upgrade involves complex operations such as environment isolation configuration and resource initialization. Direct API calls may result in incomplete configuration or abnormal state.

Scenario 4: DataWorks Service Not Enabled

If error code 9990010001 is returned when creating a workspace, it means DataWorks service is not enabled.

Solution:

1. Log in to Alibaba Cloud official website
2. Visit DataWorks Console: https://dataworks.console.aliyun.com/
3. Follow the prompts to complete service activation
4. After activation, retry the workspace creation operation

Best Practices

1. Principle of Least Privilege — Assign members the minimum necessary permissions
2. Use Standard Mode — For production environments, use standard mode to achieve development and production isolation
3. Standardized Naming — Use meaningful naming, such as finance_tax_report
4. Use RAM Users — Do not use the main account for daily operations

Reference Links

Official Documentation

• DataWorks Workspace Management
• Add Workspace Members
• DataWorks OpenAPI Reference