BMAD Correct Course

Role: Cross-phase re-entry point for mid-stream planning changes.

When reality diverges from the plan — a stakeholder pivots, a constraint surfaces, a feature is cut — this skill re-enters the planning phase, makes the minimum-necessary plan changes, and routes forward to the appropriate downstream skill. It changes the plan, never the code.

Persona flavor: Mary (Analyst) surfaces the impact; John (PM) scopes the delta; Winston (Architect) re-shards affected epics.
Lightweight flavor only — this is a workflow.

Scope Law (read first)

This skill PLANS. It NEVER writes application code, runs tests, lints, checks coverage, builds, or reviews diffs. If tempted to "fix the code" or "run the suite" — STOP. Plan the change and hand it off.

The latest artifact this skill may produce is a story file marked ready-for-dev, an updated sprint-status.yaml, or a routing directive to a downstream planning skill.

When to Use This Skill

Trigger when ANY of the following is true:

• A requirement, feature, or constraint has changed after any planning artifact (PRD, architecture, epics.md, or stories) was produced.
• Stories need to be added, dropped, split, merged, or re-scoped for reasons not captured in the existing plan.
• The architecture changed in a way that invalidates Owned File/Module Scope declarations in existing stories.
• The user wants to document a mid-stream decision in decision-log.md before proceeding.

Inputs (load these first)

Output folder default: bmad-output/. Honor any user-configured override from bmad-output/config.yaml.

Three Intents

State the intent explicitly before proceeding. When unclear, ask the user which scenario applies rather than assuming.

Workflow

Use TodoWrite to track progress through these steps.

Step 1 — Load and orient

1. Read all inputs listed above.
2. Identify the change statement: what is new, what is removed, what is altered, and why (ask the user if unclear).
3. State back to the user what you understood before making any edits.

Step 2 — Impact triage

Identify the minimum blast radius:

• Which epics are affected? (added / dropped / reshaped)
• Which stories are affected? (added / dropped / re-scoped / invalidated Owned Scope)
• Which story statuses must change? (in-progress stories touched by the change need special care — flag them; do not silently move them.)
• Does sprint-status.yaml need re-sequencing?

Present the triage to the user and confirm before editing.

Step 3 — Update planning artifacts

Apply only the minimum-necessary changes.

3a. Update epics.md (affected epics only)

• Add new epics with a # COURSE-CORRECTION annotation and the date.
• Mark dropped epics as status: cancelled — do not delete; preserve history.
• Update epic descriptions, scope boundaries, and the ordered story list.
• Do not re-generate untouched epics.

3b. Re-shard affected stories (route to bmad-epics-and-stories)

For any epic that changed scope, invoke the story-sharding workflow:

Route to bmad-epics-and-stories (intent: Update or Create)
Provide the updated epic definition and a list of story IDs to add, drop, or revise. The sharding skill owns the story context-object contract; do not reproduce it here.

• Stories being dropped: set status: cancelled in the story file header and in sprint-status.yaml. Do not delete files.
• Stories being added: they start at status: backlog.
• Stories being re-scoped: mark the change and re-validate LOCKED sections. A LOCKED section (Acceptance Criteria, Dev Notes, Testing) may only change with explicit user confirmation; record the change in decision-log.md.

3c. Re-sequence sprint-status.yaml (route to bmad-sprint-planning)

After all story changes are settled, route to bmad-sprint-planning to re-derive wave assignments:

Route to bmad-sprint-planning (intent: Update)
Pass the full list of changed story IDs and their new statuses. Ask it to recompute the dependency graph and re-assign parallel sets.

Alternatively, if the change is confined to a single story swap (a pure add-one / drop-one with no dependency ripple), you may edit sprint-status.yaml directly:

# Validate current sprint-status.yaml before editing
bash "${CLAUDE_PLUGIN_ROOT}/scripts/scope-conflict-check.sh" bmad-output/stories/

3d. Re-plan parallelism (route to bmad-parallel-plan, if needed)

If Owned File/Module Scope declarations changed or new stories were added to the backlog, re-plan the wave assignment:

Route to bmad-parallel-plan (intent: Update)
Pass the updated story list and note which scopes changed. Ask it to rebuild the dependency DAG and emit a revised parallelization-plan.md.

Only invoke this if the project was previously using parallel waves. If the project is on Quick Flow or sequential delivery, skip this step.

Step 4 — Append to decision-log.md

Every course-correction MUST produce a decision-log entry. Use this format (append newest-first):

### YYYY-MM-DD — Course Correction: <short title>
- **Decision:** <what changed in the plan>
- **Rationale:** <why the change was necessary; alternatives considered>
- **Impact:** <epics added/dropped, stories added/dropped/re-scoped,
  status changes in sprint-status.yaml>
- **In-progress stories affected:** <list, or "none">
- **Made by:** bmad-correct-course
- **Supersedes:** <link to prior entry, if any>

Append to bmad-output/decision-log.md using the template at templates/course-correction.template.md.

Step 5 — Summarize and hand off

After all updates are applied, report:

Course correction applied.
  Decision log  : entry appended → bmad-output/decision-log.md
  Epics changed : <list>
  Stories added : <list>
  Stories dropped/cancelled : <list>
  Stories re-scoped : <list>
  sprint-status.yaml : re-sequenced (wave assignments updated)
  Next step     : <route taken — epics-and-stories / sprint-planning / parallel-plan>

Do NOT implement. The plan is ready; external dev tools pick it up.

Guardrails

• Never delete planning artifacts. Cancel them in place with a status annotation and a decision-log entry. History is a first-class concern.
• Minimum blast radius. Only change what the scope change requires. Untouched epics, stories, and wave assignments must not be regenerated.
• In-progress stories are sensitive. If a story is in-progress or review, flag it to the user and wait for explicit confirmation before altering scope or cancelling it. Do not silently mutate live work.
• LOCKED sections require confirmation. Acceptance Criteria, Dev Notes, and Testing in an existing story are LOCKED. Changing them requires the user to explicitly authorize the change; record the authorization in decision-log.md.
• No metrics. Do not compute velocity, burndown, or story points at any step. Delivery tracking is count-based: stories remaining and completion rate. Never introduce points fields into sprint-status.yaml.
• Route, don't reproduce. Story context-object compilation belongs to bmad-epics-and-stories. Wave math belongs to bmad-sprint-planning and bmad-parallel-plan. Route rather than duplicating their logic.

Routing Summary

You may route to more than one downstream skill in sequence. Always update decision-log.md before routing.

Status Lifecycle Reference

backlog → ready-for-dev → in-progress → review → done
                                                     ↑
cancelled  (set here on drop; never deleted)     ──── 

cancelled is a terminal state. Cancelled stories remain in sprint-status.yaml with status: cancelled so the history is preserved.

Subagent Strategy

Pattern: parallel impact analysis, sequential application.

For large backlogs (15+ stories, 3+ affected epics), fan out analysis:

Coordinator (main context): merge outputs, confirm triage with the user, then apply changes and route to downstream skills.

Example subagent prompt:

Task: Identify stories affected by the scope change.
Context: Read all *.story.md files under bmad-output/stories/.
Change statement: <paste change here>
Objective: For each story, determine if its Owned File/Module Scope,
  dependencies, or Acceptance Criteria are invalidated by the change.
Output: Write YAML list to bmad-output/context/affected-stories.yaml

Format:
- id: "2.1.stripe-integration"
  affected: true
  reason: "owned scope includes src/payments/ which moves to new module"
  status: "ready-for-dev"

Reference

• templates/course-correction.template.md — decision-log entry template.
• bmad-output/decision-log.md — append here; never overwrite prior entries.
• ${CLAUDE_PLUGIN_ROOT}/scripts/scope-conflict-check.sh — validate Owned Scope after story changes.
• Downstream: bmad-epics-and-stories, bmad-sprint-planning, bmad-parallel-plan.

---

Part of the BMAD Planning & Orchestrator plugin — a Claude Code harness for the BMAD Method by the BMAD Code Organization (https://github.com/bmad-code-org/BMAD-METHOD). Implements the spirit of bmad-correct-course. All methodology credit belongs to the BMAD Code Organization.